X, Y, Z Series

PC Board Mountable RFI Power Line Filters for Emission Control Applications

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

X, Y, Z Series

X, Y, and Z series RFI filters are compact, PC board mountable components, designed to consume minimal board space. They provide a choice of three levels of performance, intended to be all the power line filter needed for the corresponding emission control application.

X Series – designed to bring most digital equipment (including switching power supplies) into compliance with FCC Part 15J, Class B conducted emission limits.

Y Series – designed to bring most digital equipment (including switching power supplies) into compliance with EN55022, Level A, and FCC Part 15J, Class B conducted emission limits.

Z Series – designed to bring most digital equipment (including switching power supplies) into compliance with EN55022, Level B (as well as FCC Part 15J, Class B) conducted emission limits.

This high compliance confidence level is attained by optimizing the differential mode performance of each series for the frequency range it needs to cover in the corresponding application. At the same time, excellent common mode performance is maintained across the frequency range of 10kHz to 30MHz, while still meeting the very low leakage current requirements of SEV and VDE portable equipment.

Electrical Schematic

V Series

W Series, 3A, 6A, 10A

W Series, 20A

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
	@ 120 VAC 60 Hz	.30 mA
	@ 250 VAC 50 Hz	.50 mA

Hipot rating (one minute):
	line to ground	2250 VDC
	line to line	1450 VDC

Operating Frequency:		50 / 60 Hz

Rated voltage (max.):		250 VAC

Rated Current:
	1EZP	60°C	1A
	2EYP / 2EZP	60°C	2A
	3EXP	60°C	3A
	3EYP	55°C	3A
	3EZP	50°C	3A
	4EXP / 4EYP	55°C	4A
	6EXP	55°C	6A

Minimum insertion loss in dB:
Line to ground in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.01	.05	.15	.5	1	5	10	30

EX Models
3A	2	13	21	35	46	44	44	44
4A	2	13	22	38	44	44	44	38
6A	2	11	20	35	40	40	40	36
EY Models
2A	8	21	31	49	44	40	40	40
3A	11	24	36	43	40	40	40	40
4A	5	18	28	45	40	40	40	36
EZ Models
1A	18	32	43	47	44	43	43	45
2A	18	32	45	41	40	40	40	40
3A	15	29	39	43	42	40	40	40

Line to line in 50 ohm circuit

Current Rating	Frequency - MHz
Current Rating	.02	.03	.05	.07	.15	..5	1	5	10	30

EX Models
3A	-	-	-	5	34	60	65	60	45	50
4A	-	-	-	10	37	70	70	70	65	55
6A	-	-	-	3	31	65	70	70	60	55
EY Models
2A	-	-	10	19	40	70	75	70	60	55
3A	-	-	10	20	42	68	68	67	62	50
4A	-	-	6	18	41	67	75	70	65	55
EZ Models
1A	7	29	34	43	62	70	70	70	60	55
2A	2	15	31	40	57	75	70	65	55	50
3A	-	10	26	34	53	75	75	70	60	55

Case Styles

EX1 / EZ1

Typical Dimensions
Terminals (5)	.250	Holes (4)	.07 Dia.
	6.35		1.8
Slot	.07 x .16	Mounting Holes (2)	.188 Dia
	1.8 x 4.1		4.78

EXP / EYP / EZP

Recommended Mounting Holes and Clearance Area

Click on image for larger version

Case Dimensions

Part No.	A	B	C	D	E
	(max.)	(max.)	(max.)	± .015	(max.)
	(max.)	(max.)	(max.)	± .38	(max.)
3EXP	2.61	1.13	1.62
3EXP	66.3	28.7	41.1

3EX1	3.01	1.84	1.16	2.375	2.79
3EX1	79.7	46.8	29.46	60.33	70.87

4EXP	2.61	1.13	1.62
4EXP	66.3	28.7	41.1

6EXP	2.61	1.13	1.75
6EXP	66.3	28.7	44.5

2EYP	2.61	1.13	1.62
2EYP	66.3	28.7	41.1

3EYP, 4EYP	2.61	1.13	1.75
3EYP, 4EYP	66.3	28.7	44.5

1EZP	2.61	1.13	1.62
1EZP	66.3	28.7	41.1

2EZP, 3EZP	2.61	1.13	1.75
2EZP, 3EZP	66.3	28.7	44.5

3EZ1	3.54	2.08	1.31	2.938	3.35
3EZ1	89.9	52.8	33.3	74.63	85.1

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3EXP	1EZP
3EX1	2EZP
4EXP	3EZP
6EXP	3EZ1
2EYP
3EYP
4EYP

USA Customer Service:	1-800-468-2023
Corcom Products Direct:	1-847-680-7400
Germany:	49-89-6089-0

Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.