Skip to content

N Series

High Performance RFI Filters for Switching Power Supply

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

N Series

The N series RFI filters are designed to provide superior common-mode and differential-mode attenuation for most digital electronic equipment (particularly switching power supplies) over the frequency range of 10kHz to 30MHz.

These filters are a cost-effective solution for very noisy equipment that must meet the conducted emission limits of the very stringent EN55022 Level B requirements, as well as FCC Part 15J, Class B.

Electrical Schematic

6VN1

10VN1

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz 1.2 mA
  @ 250 VAC 50 Hz 2.0 mA
     
Hipot rating (one minute):
  line to ground 2250 VDC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 6A to 10A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .1 .15 .5 1 5 10 30
6A 6 20 28 34 58 54 53 53 43
10A 8 8 44 55 75 70 70 70 55
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .1 .15 .5 1 5 10 30
6A 6 14 41 52 66 77 72 60 60
10A 6 6 35 45 72 70 72 75 70
 

Case Styles

 

Typical Dimensions
Terminals (5) .250 Holes (4) .07 Dia.
6.35 1.8
Slot .07 x .16 Mounting Holes (2) .188 Dia
1.8 x 4.1 4.78

 

 

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ± .015 (max.)
± .38
6VN1 3.56 2.15 1.81 2.938 3.38
90.4 54.6 45.9 74.63 85.8
10VN1 4.69 2.27 1.8 4.063 4.47
119.1 57.7 45.7 103.2 113.5

Ordering and Design Information

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

6VN1 10VN1

USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.