K Series
- Suitable for high impedance loads
- Well suited to applications where pulsed, continuous and/or intermittent RFI interference
is present
- EK models meet the very low leakage current requirements for VDE portable equipment and non-patient care medical equipment
- Available with ground line inductor (choke)
Ordering Information
*1-15A: IEC 60320-1 C14 inlet mates with C13 connector
20VK7: C20 inlet mates with C19 connector
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
|
VK Models |
EK Models |
| |
@ 120 VAC 60 Hz |
.5 mA |
.21 mA |
| |
@ 250 VAC 50 Hz |
1.0 mA |
.36 mA |
| |
|
|
| Hipot rating (one minute): |
| |
Line to Ground |
2250 VDC |
| |
Line to Line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
1A to 60A |
| |
20VK7 VDE approved to 16 Amps |
| Operating Ambient Temperature Range (at rated current Ir): |
| |
|
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Electrical Schematics
30 & 40VK6C
60VK6
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord
|
| K1 (1, 2, 3, 6, 10A)
| Typical Dimensions: |
| |
Line/Load Terminals(4): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
K1 (20A)
| Typical Dimensions: |
| |
Line/Load Terminals(4): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
K3
| Typical Dimensions: |
|
| |
Wire leads (5): |
.4.0 [101.6] Min. AWG18 (AWG16 for 10A) |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
10VK6
| Typical Dimensions: |
|
| |
Terminals (5): |
8-32
Torque 18 lbf-in. [2.03 N-m] max. ±2[.22] |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
20VK6
| Typical Dimensions: |
|
| |
Terminals (5): |
8-32
Torque 18 lbf-in. [2.03 N-m] max. ±2[.22] |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
30VK6/6C & 40VK6/6C
| Typical Dimensions: |
|
| |
Terminals (5): |
8-32
Torque 18 lbf-in. [2.03 N-m] max. ±2[.22] |
| |
Mounting Slots (4): |
..250 x .156 [6.35 x 3.96] Dia. |
60VK6
| Typical Dimensions: |
|
| |
Terminals (5): |
1/4-20,
Torque 56 lbf-in. [6.32 N-m] max. ±2[.22] |
| |
Mounting Slots (4): |
..250 x .156 [6.35 x 3.96] Dia. |
|
|
K7 & K7M (3, 5, 10A)
| Typical Dimensions: |
| |
Load Terminals(2): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Line Inlet (1): |
IEC 60320-1 C14 |
| |
K7 Inserts (2): |
6-32 x 1/4 |
| |
K7M Inserts (2): |
M3x.5 |
20VK7
| Typical Dimensions: |
| |
Load Terminals(2): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Line Inlet (1): |
IEC 60320-1 C20 |
| |
K7 Inserts (2): |
6-32 x 1/4 |
| |
K7M Inserts (2): |
M3x.5 |
Recommended Panel Cutouts
K7 & K7M Cutout (3, 5, 10A)
tolerance ± .005 [0.13]
Back mount only
20VK7
tolerance ± .005 [0.13]
Back mount only
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
± .015 |
(max.) |
| ± .38 |
1VK1, 1EK1,
2VK1, 2EK1 |
3.1 |
2.07 |
0.91 |
2.375 |
2.81 |
| 78.7 |
52.6 |
23.1 |
60.33 |
71.4 |
|
1VK3, 1EK3,
2VK3, 2EK3 |
1.81 |
2.07 |
0.91 |
2.375 |
2.81 |
| 46.0 |
52.6 |
23.1 |
60.33 |
71.4 |
|
3VK1, 3EK1,
5VK1, 5EK1 |
3.10 |
2.07 |
1.16 |
2.375 |
2.81 |
| 78.7 |
52.6 |
29.5 |
60.33 |
71.4 |
|
3VK3, 3EK3,
5VK3, 5EK3 |
1.81 |
2.07 |
1.16 |
2.375 |
2.81 |
| 46.0 |
52.6 |
29.5 |
60.33 |
71.4 |
|
3VK7, 3VK7M,
3EK7, 3EK7M,
5VK7, 5VK7M,
5EK7, 5EK7M |
3.21 |
2.25 |
1.28 |
1.575 |
0.63* |
| 81.5 |
57.2 |
32.5 |
40.01 |
16.0* |
|
| 10VK1, 10EK1 |
3.35 |
2.07 |
1.16 |
2.375 |
2.81 |
| 85.1 |
52.6 |
29.5 |
60.33 |
71.4 |
|
| 10VK3, 10EK3 |
2.07 |
2.07 |
1.16 |
2.375 |
2.81 |
| 52.6 |
52.6 |
29.5 |
60.33 |
71.4 |
|
| 10VK6 |
3.46 |
2.07 |
1.16 |
2.375 |
2.81 |
| 87.9 |
52.6 |
29.5 |
60.33 |
71.4 |
|
10VK7, 10VK7M,
10EK7, 10EK7M |
3.71 |
2.25 |
1.28 |
1.575 |
0.63* |
| 94.2 |
57.2 |
32.5 |
40.01 |
16.0* |
|
| 20VK1, 20EK1 |
3.35 |
2.56 |
1.53 |
2.938 |
3.35 |
| 85.1 |
65.0 |
38.9 |
74.63 |
85.1 |
|
| 20VK6 |
3.46 |
2.56 |
1.53 |
2.938 |
3.35 |
| 87.9 |
65.0 |
38.9 |
74.63 |
85.1 |
|
| 20VK7 |
3.8 |
2.28 |
1.78 |
1.575 |
.846¹ |
| 90.4 |
54.6 |
39.6 |
74.63 |
85.8 |
|
| 30VK6, 30VK6C |
5.34 |
3.38 |
1.53 |
3.75 |
4.20 |
| 135.6 |
85.9 |
38.9 |
95.25 |
106.7 |
|
| 40VK6, 40VK6C |
5.34 |
3.38 |
1.53 |
3.75 |
4.20 |
| 135.6 |
85.9 |
38.9 |
95.25 |
106.7 |
|
| 60VK6 |
6.00 |
3.38 |
1.53 |
3.75 |
4.20 |
| 152.4 |
85.9 |
38.9 |
95.25 |
106.7 |
|
| * ± .02 [.05] |
| ¹ ± .01 [.025] |
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
| EK Models |
1 & 3 EK
|
2 & 10EK
|
5EK
|
20EK
|
| VK Models |
1VK
|
2VK
|
3VK
|
5VK
|
10VK
|
20VK
|
30VK & 30VK6C
|
|
40VK & 40VK6C
|
60VK
|
|
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
Differential Mode / Symmetrical (Line to Line) |
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
|
| VK Models |
| 1A, 3A |
15 |
30 |
38 |
50 |
50 |
50 |
| 2A, 5A, 10A |
6 |
19 |
28 |
42 |
45 |
50 |
| 20A |
6 |
19 |
28 |
42 |
45 |
50 |
| 30A, 40A |
6 |
19 |
28 |
42 |
45 |
50 |
| 60A |
6 |
22 |
28 |
32 |
39 |
35 |
| EK Models |
| 1A, 3A |
15 |
29 |
35 |
45 |
45 |
50 |
| 2A, 5A, 10A |
8 |
19 |
25 |
38 |
40 |
45 |
| 20A |
8 |
19 |
25 |
38 |
40 |
45 |
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
|
| VK Models |
| 1A, 3A |
- |
- |
48 |
55 |
50 |
35 |
| 2A, 5A, 10A |
- |
- |
30 |
50 |
30 |
30 |
| 20A |
6 |
6 |
30 |
50 |
30 |
30 |
| 30A, 40A |
2 |
40 |
60 |
65 |
57 |
55 |
| 60A |
13 |
49 |
67 |
57 |
53 |
53 |
| EK Models |
| 1A, 3A |
- |
- |
48 |
55 |
50 |
35 |
| 2A, 5A, 10A |
- |
- |
30 |
50 |
30 |
30 |
| 20A |
6 |
6 |
30 |
50 |
30 |
30 |
|
|
|
