Skip to content
 |  Tyco Electronics Segment Indicator  |   | 
Tyco Electronics - Our commitment. Your advantage.
Visit www.tycoelectronics.com Corcom Products
Home > Series > Power Line > EMC

EMC Series

Compact and Cost Effective Dual Stage RFI Power Line Filters

UL Recognized
CSA Certified
VDE Approved

Catalog Data Sheet

EMC Series

The EMC series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA.

The EMC series is the most compact dual stage filter available from Tyco Electronics. This cost effective design has a maximum current rating of 30 amps; higher than any similar catalog product. The EMC series was designed to address the need for more differential mode attenuation in the lower frequency range while still maintaining high common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies with increased operating frequencies. The EMC series is ideal for applications that require a high level of performance in a compact, cost effective package.

Electrical Schematic

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
    3, 6, 10 Amp 15, 20, 30 Amp
  @ 120 VAC 60 Hz .21 mA .73 mA
  @ 250 VAC 50 Hz .43 mA 1.52 mA
     
Hipot rating (one minute):
  line to ground 2250 VDC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 1A to 300A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.05 .07 .11 .15 1 2 10 20 30
3A 6 6 3 16 65 66 62 60 59
6A 6 6 2 15 65 67 65 62 63
10A 5 2 13 24 72 72 56 50 48
15A 3 1 12 22 70 68 57 54 53
20A 2 2 11 21 58 57 63 55 52
30A 2 2 14 22 47 52 60 48 43
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.05 .07 .11 .15 1 2 10 20 30
3A 12 13 7 18 64 69 65 60 52
6A 12 12 8 27 61 61 59 56 54
10A 14 15 12 33 54 58 47 34 36
15A 16 16 13 34 61 52 36 36 23
20A 17 19 15 37 67 62 36 32 30
30A 17 18 14 40 62 53 30 28 26
 

Case Styles

EMC1

Typical Dimensions
Terminals (5) .250 Mounting Holes (2) .187 Dia ±.008
6.35 4.75 ±.20

 

EMC3

Typical Dimensions
Wire Leads (min.) 4.0 Mounting Holes (2) .187 Dia ±.008
101.6 4.75 ±.20

 

 

EMC6

Typical Dimensions
Terminals (5): 8-32 Mounting Holes (2) .187 Dia ±.008
4.75 ±.20

 

30EMC6

Typical Dimensions
Terminals (5): 10-32 Mounting Slots (4): .203 x.156
5.16 x 3.96

 

 

20VDK6

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) (max.) (max.)
3EMC1 3.35 1.81 1.16 2.375 2.78
85.1 46.0 29.5 60.3 70.6
6EMC1 3.85 2.07 1.16 2.938 3.35
97.8 52.6 29.5 74.6 85.1
10EMC1 3.85 2.07 1.53 2.938 3.35
97.8 52.6 38.91 74.6 85.1
15EMC1, 20EMC1 4.97 2.25 1.78 4.063 4.46
126.2 57.2 45.2 103.2 113.3
3EMC3 2.07 1.81 1.16 2.375 2.78
52.6 46.0 29.5 60.3 70.6
6EMC3 2.56 2.07 1.16 2.938 3.35
65.0 52.6 29.5 74.6 85.1
10EMC3 2.56 2.07 1.53 2.938 3.35
65.0 52.6 38.9 74.63 85.1
15EMC3 3.69 2.25 1.78 4.063 4.47
93.7 57.2 45.2 103.2 113.5
10EMC6 3.94 2.07 1.53 2.938 3.35
99.9 52.6 38.9 74.6 85.1
15EMC6, 20EMC6 5.09 2.25 1.78 4.063 4.47
129.3 57.2 45.2 103.2 113.5
30EMC6 6.05 3.12 2.18 3.50 3.96
153.7 79.2 55.4 88.9 100.6
 

Part Numbers

Click on any part number for distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3EMC1 10EMC3
6EMC1 15EMC3
10EMC1 10EMC6
15EMC1 15EMC6
20EMC1 20EMC6
3EMC3 30EMC6
6EMC3  

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.