Skip to content
Home > Series > Medical > MV

MV Series

Multi-purpose Medical Filter for Power Line Noise Protection with Limited Leakage Current

UL Recognized
CSA Certified
VDE Approved

 

Catalog Data Sheet

MV Series

The MV series answers the need for a medical filter to help equipment comply with increasing noise sources in medical applications while still meeting leakage current requirements of UL2601.

Less strict than previous UL medical standards, UL2601 limits leakage current for patient care equipment. Due to the increased need for higher performance filtering, UL has allowed more leakage current than in previous standards.

The MV takes advantage of this to offer improved line-toground performance in a moderately priced filter. Higher line-to-line performance is achieved through its additional differential mode rod inductors. Overall, the filter provides a good solution to emission and immunity problems, at a moderate cost, in a reasonable package size.

Electrical Schematic

 

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz .07 mA
  @ 250 VAC 50 Hz .13 mA
     
Hipot rating (one minute):
  line to ground 2250 VDC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 3A to 20A
   
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.15 .5 1 2 5 10 20 30
3A 14 19 20 30 46 40 34 31
6A 19 27 30 38 50 40 35 35
10A 15 25 26 34 46 50 44 42
20A 18 30 34 34 46 40 36 20
 
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.15 .5 1 2 5 10 20 30
3A 33 65 65 65 65 60 53 50
6A 40 65 65 65 65 60 57 55
10A 33 65 65 65 65 65 55 55
20A 25 65 65 65 65 60 57 45

Case Styles

3/6/10 MV1


20MV1


Typical Dimensions
Terminals (5) .250 Holes (4) .07 Dia.
6.35 1.8
3A, 6A, & 10A Mounting Holes (2)
 .188 Dia 20A Mounting Holes (4): .250 x .156 Dia
4.78 6.35 x 3.96

 

 

Case Dimensions

Part No. A B C D E
(max.) (max.) (max.) ±.015 (max.)
± .38
3MV1 3.36 1.82 1.28 2.375 2.78
85.3 46.2 32.5 60.33 70.6
6MV1, 10MV1 3.86 2.08 1.53 2.938 3.34
98.0 52.8 38.9 74.63 84.8
20MV1 5.23 3.38 1.53 3.75 4.20
132.8 85.9 38.9 95.25 106.7

Ordering and Design Information

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

3MV1  
6MV1  
10MV1  
20MV1  

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.