Skip to content
Home > Series > IEC > EEJ

EEJ Series

Enhanced Performance (1-20 Amp) Compact RFI Filter IEC Connector Package

UL Recognized
CSA Certified
VDE Approved

15EEJ - VDE rated at 10 amps, 250 VAC
20EEJ - VDE rated at 16 amps, 250 VAC

Catalog Data Sheet

EEJ Series

The new EEJ series is the next generation of power inlet filters. The 1-15 amp versions are flange mounted and mechanically equivalent to the EEA/EEB series. The performance has been enhanced to meet the needs for more attenuation. The EEJ series also has an extended metal flange around the socket for improved high frequency EMI shielding as well as a larger contact area for the panel ground.

The EEJ series also includes a 20 amp version that uses the inlet IEC 320/C20. This product was designed to keep up with the demand for higher current equipment. Applications include higher current power supplies and computing equipment, which consist of work stations, base stations, servers, etc.

*15EEJ - VDE rated at 10 amps, 250 VAC 20EEJ - VDE rated at 16 amps, 250 VAC

Electrical Schematic

 

Resistor location for reference only

Specifications

Maximum leakage current, each line to ground:
  @ 120 VAC 60 Hz .22 mA
  @ 250 VAC 50 Hz .38 mA
     
Hipot rating (one minute):
  line to ground 1500 VAC
  line to line 1450 VDC
     
Operating Frequency: 50 / 60 Hz
     
Rated voltage (max.): 250 VAC
     
Rated Current: 1A to 20A *
  * refer to part number for rating
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .1 .15 .5 1 5 10 30
1A 15 27 29 32 41 47 47 47 40
3A - 10 15 20 30 39 48 50 60
6A - 1 5 9 21 28 41 44 54
10A - 1 4 7 14 18 31 36 51
15A - - - 2 5 8 21 26 42
20A - - 13 5 14 21 30 33 42

Line to line in 50 ohm circuit
Current Rating Frequency - MHz
.01 .05 .1 .15 .5 1 5 10 30
1A - - 5 8 19 27 45 43 40
3A - - 5 8 17 20 39 42 40
6A - - 5 8 17 21 32 40 40
10A - - 5 8 17 21 23 36 38
15A - - 5 8 17 23 33 30 38
20A - - 5 2 17 25 38 48 48

Case Styles

EEJ1

20EEJ1

EEJ2

 

Typical Dimensions
Terminals (3) .250 Holes (2) .07 Dia.
6.35 1.8
Slot .07 x .16 Mounting Holes (2)
 .132 Dia
1.8 x 4.1 3.35
    with .260 x 90° countersunk for#4 Flathead Screw

EEJP

EEJ8

20EEJ8

Typical Dimensions
Wire Leads (min.) : 4.0 1-15A Wire Gauge: 18AWG /UL1015
101.6
Mounting Holes (2)
 .132 Dia 20A Wire Gauge: 14 AWG / UL1015
3.35
with .260 x 90° countersunk for#4 Flathead Screw  

 

1 to 15A EEJP PC Board Layout

tolerance ± .005 [0.13]

 

 

Recommended Panel Cutouts

1 to 15A EEJ

20EEJ

Case Dimensions

Part No. A B C D E F
(max.) (max.) (max.) ±.015 (max.) (ref)
± .388
1EEJ1, 3EEJ1,
6EEJ1, 10EEJ1,
15EEJ1		 2.15 1.13 0.96 1.58 2.04  
54.61 28.70 24.38 40.00 51.76  
20EEJ1 3.13 1.37 1.18 1.650 2.09  
79.38 34.79 29.99 42.01 53.00  
1EEJ2, 3EEJ2,
6EEJ2, 10EEJ2 		1.54 1.13 0.96 1.58 2.04  
39.12 28.70 24.38 40.0 51.76  
15EEJ2 1.79 1.13 0.96 1.58 2.04  
45.47 28.70 24.38 40.00 51.76  
1EEJP, 3EEJP,
6EEJP		 1.54 1.13 0.96 1.58 2.04  
39.12 28.70 24.38 40.00 51.76  
10EEJP, 15EEJP 1.79 1.13 0.96 1.58 2.04  
45.47 28.70 24.38 40.00 51.76  
1EEJ8, 3EEJ8,
6EEJ8, 10EEJ8,
15EEJ8		 1.54 1.13 0.81 1.58 2.04  
39.12 28.70

20.7

 40.00 51.76  
20EEJ8 2.65 1.35 1.18 1.65 2.09 .62
67.31 34.29 29.99 42.01 53.00 15.75

Ordering and Design Information

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

1EEJ1 10EEJ1
1EEJ2 10EEJ2
1EEJP 10EEJP
1EEJ8 10EEJ8
3EEJ1 15EEJ1
3EEJ2 15EEJ2
3EEJP 15EEJP
3EEJ8 15EEJ8
6EEJ1 20EEJ1
6EEJ2 20EEJ8
6EEJP
6EEJ8
   
Line Cord GA400
Insulating Boot FA601
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.