Skip to content
Home > Series > DC > DB

DB Series

Compact RFI High Current DC Inlet Connectors and Filters

UL Recognized
CSA Certified
TUV Certified

Catalog Data Sheet

 

DB Series

Tyco Electronics has expanded the Corcom product line with a new power inlet filter. Available in four levels of filtering and an unfiltered version, these inlets are designed to accept up to 60 amps of current at 150 volts DC in the filtered versions and 300 volts AC or DC in the unfiltered version. Filtered versions include the basic clean-up DBJ style through the higher performing DB style and DBX style which provideds up to 68dB insertion loss within the 150kHz to 30Mhz frequency range. The DBF style uses feedthrough capacitors for improved high-frequency performance.

Power input terminals are Tyco Electronics'#4 AWG Elcon "drawer style" contacts. The filter's load sides come prewired with #6 AWG hi-flex stranded wire. The unfiltered plugs and receptacles are available with pre-terminated, hi-flex wire of various lengths.

Ordering Information

Electrical Schematic

DB8

DBF8

DBJ8

DBX8

Specifications

Hipot rating (one minute):
    Filtered Models DBRL & DBPL
  line to ground 2121 VDC n/a
  line to line 1768 VDC 1600 VAC
     
Operating Voltage (max.): 150 VDC*
    *TUV Approval to 120VDC
Rated Current: 60 Amps
   
Operating ambient temperature range at rated current Ir -10°C to +55°C
In an ambient, Ta, higher than +40° C, the maximum operating current, Io, is calculated as follows: Io=Ir√(100-Ta/45 )
 
WARNING: This product is not approved for hot swap or current interruption in DC applications. Doing so will result in irreperable damage to contacts.
 
Minimum insertion loss in dB:
Line to ground in 50 ohm circuit
Part No. Frequency - MHz
0.1 0.15 0.5 1 5 1 20 30 50 100
60DBJ8 - - - 1 13 21 30 40 30 20
Part No. Frequency - MHz
0.05 0.1 0.15 0.5 1 3 5 10 20 30
60DB8 2 7 10 23 30 48 38 28 20 16
60DBF8 15 22 25 35 42 50 58 54 38 36
60DBX8 - 10 16 40 48 54 60 51 40 36
 
Line to line in 50 ohm circuit
Current Rating Frequency - MHz
0.1 0.15 0.5 1 5 1 20 30 50 100
60CBJ8 5 8 19 26 34 26 20 16 - -
Part No. Frequency - MHz
0.05 0.1 0.15 0.5 1 3 5 10 20 30
60DB8 20 26 29 43 53 30 30 24 20 18
60DBF8 9 15 18 30 34 40 44 44 48 52
60DBX8 31 30 30 70 70 54 50 60 54 50

Case Styles

DBJ8

 

DB8 & DBF8

DBX8

DBRL


Note: #6 AWG Wire. 300 V Rated 105° C in accordance with UL10198

Cable Length minimum
60DBRL1 12.0 "
60DBRL3 36.0"

DBPL


Note: #6 AWG Wire. 300 V Rated 105° C in accordance with UL10198

Cable Length minimum
60DBPL1 12.0
60DBPL3 36.0
60DBP:9 108.0

Note: Custom and longer cable lengths also available

 

Case Dimensions

Part No. A B C D E F
(max.) (max.) ± 0.025 ± 0.025 ± 0.025 ± 0.025
± 0.635 ± 0.635 ± 0.635 ± 0.635
60DBJ8 3.2 1.36 1.181 1.654 2.087 1.280
81.28 34.544 29.997 42.012 53.01 32.512
60DB8 & 60DBF8 4.06 3.20 1.45 2.50 0.875 2.077
103.124 81.280 36.830 63.50 22.225 52.756
60DBX8 6.06 3.50 1.45 2.876 0.875 2.265
153.924 88.90 36.83 73.05 22.225 57.531
Part No. A B C D E F
± 0.025 ± 0.025 ± 0.025 ± 0.025 ± 0.025 ± 0.025
± 0.635 ± 0.635 ± 0.635 ± 0.635 ± 0.635 ± 0.635
60DBRL 1.22 1.181 2.087 1.654 1.023 0.591
30.988 29.997 53.009 42.011 25.984 15.011
60DBPL 1.695 0.93 2.08 1.654 1.195 0.465
43.053 23.622 52.832 42.011 30.353 11.811
 

Panel Cutout

DBRL may be front or rear mounted

DBJ8 recommended for front mount only

Application Tooling

Insertion / Extraction tool recommended for DBR / DBP: 1643922-1

No hand tool available. Must crimp per Tyco Electronics' application spec: 114-13206

Crimp tool: M22520/23-01
Indenter head: M22520/23-04
Locator: M22520/23-11

Accessories

Connector system locking kit available, contact Corcom for details.

Note: Tool required to disengage mated connector pair when using locking kit.

Ordering and Design Information

Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links. For more information refer to the Corcom Part Numbering System reference.

60DBR 60DBP
60DBRL1 60DBPL1
60DBRL3 60DBPL3
60DBJ8 60DBPL9
60DB8 60DBF8
60DBX8  

 

 
USA Customer Service: 1-800-468-2023
Corcom Products Direct: 1-847-680-7400
Germany: 49-89-6089-0
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change.