| Line Cords & General Use Accessories |
Line Cord - Part No. GA400
7 1/2 foot, 3-conductor line cord to mate with models within the catalog. 1250 watt, 10A - 125 VAC SVT, Black, UL, CSA
Not recommended for patient care applications due to leakage current of the line cord. |
 |
Insulating Boot - Part No. FA601
Plastic shroud to cover back of IEC connector style filters with style 1 terminals for EC, ED, EEA, EEB, EEJ, and EF Series. |
|
| A Series Accessories |
Mounting Bracket - Part No. AA400
Mounting bracket with captive nuts for
20/30 Amp A series filters
Mounting Bracket - Part No. AA405
Mounting bracket with captive nuts for
45/60 Amp A series filters |
|
End Bell - Part No. AA406
End Bell Kit with Captive nuts for
20/30 Amp A Series Filters
End Bell - Part No. AA407
End Bell Kit with Captive nuts for
45/60 Amp A Series Filters
Additional Nuts - Part No. AA401
For use to mount any size A Series filter
|
 |
| DC Series Accessories |
Pre-assembled Connector- Part No. GA310
Pre-assembled custom connector assembly with 3, 36"long 18 gauge wires to mate with DA Series filters.
Molex part numbers:
03-12-1036 Connector housing
18-12-1222 Female terminal (3 required) |
 |
Pre-assembled Connector- Part No. GA210
Pre-assembled custom connector assembly with 2, 36"long 18 gauge wires to mate with the DC version of the P Series filters.
Molex part numbers:
03-12-1026 Connector housing
18-12-1222 Female terminal (2 required)
|
 |
| J Series Accessories |
Tool - Part No. JA500
Extractor tool for removal and insertion of voltage selector card in J Series |
 |
Voltage Card - Part No. JA302
Two-voltage selection card for use with J Series. Marked 115V/230V
Voltage Card - Part No. JA304
Four-voltage selection card for use with J series. Marked 110V/120V/220V/240V. One JA304 comes standard with each J Series module. |
 |
| L Series Accessories |
Fuseholder - Part No. LA200
Accommodates one 1/4" x 1-1/4" North American fuse for L Series only.
Fuseholder - Part No. LA201
Accommodates one 5 x 20 mm metric fuse for L Series only. |
 |
Voltage Wheel - Part No. LA303
Three-voltage selection drum for use with HL4 and DL4 models. Marked 110V / 220V / 240V
Voltage Wheel - Part No. LA304
Four-voltage selection drum for use with HL4 and DL4 models. Marked 110V/120/220V/240V .
One LA304 comes standard with each HL4 and DL4 model. |
 |
Blank - Part No. LA400
Blank to replace switch in single voltage selection models DL1 and HL1 Models only.
Insulating Boot - Part No. LA601
Plastic shroud to cover back of EDL and EHL power entry modules preventing inadvertent access. |
|
| M Series Accessories |
Assembly - Part No. MA100
Power interconnect assembly for voltage select models of the M series. Simplifies connection of power entry module to power supply. Designed for use with either filtered or unfiltered voltage selection models. 8.5" wire leads. |
 |
| Part No. MA101 - plug only |
 |
| Part No. MA102 - 100 pins on strip |
 |
| Part No. MA103 - 7000 pins on reel |
 |
| Part No. MA104 - individual pin |
 |
2 Voltage Card - Part No. MA302
Two-voltage selection capability for use with M series power entry modules. Marked 120V/240V. One MA302 comes standard with two-voltage M series modules.
4 Voltage Card - Part No. MA304
Four-voltage selection capability for use with M series power entry modules. Marked 100V/120V/230V/240V. One MA304 comes standard with four-voltage M series modules. |
 |
Assembly - Part No. MA400
Medical safety bracket kit for use with HM models. Bracket allows customer to undergo UL544 abnormal condition testing without removal of fuse(s) in power entry module.
Part No. MA401 - Bracket only
Part No. MA402 - Standoff only |
 |
Insulating Boot
Plastic shroud to cover back of VM and EFM power entry modules preventing inadvertent access to tracings.
Part No. MA601 - fits M4S versions
Part No. MA602 - fits M1S versions
Part No. MA603 - fits M4 versions
Part No. MA604 - fits M1 versions |
 |
| P Series Accessories |
Assembly - Part No. PA100
Power connector assembly for voltage select modules of the P series. Simplifies the connection of power entry module to power supply. Designed for use with either filtered or unfiltered modules. Includes 6 inch wires (4) |
 |
Part No. PA101 - Plug Only
Part No. PA102 - Pins Only
Part No. PA105 - Same as PA100, except has 2 wires for no voltage selection models. |
Shown Above - PA101 |
Conversion Clip - Part No. PA200
For use with single fuse applications, included with single fuse configurations. |
 |
J Extender - Part No. PA400
Extends P series module to fit J panel cutout.
Cannot be used with B Shield
|
 |
L Extender - Part No. PA410
Extends P series width to fit L panel cutout (use two per module.)
For use with unshielded versions only. |
 |
| TS Series Transient Voltage Suppressors |
|
Transient Voltage Suppressor - TS125S-00
Transient voltage suppressors designed to protect single phase normal and common mode circuits Screw terminals Max line voltage-145VAC
Transient Voltage Suppressor - TS125W-00
Transient voltage suppressors designed to protect single phase normal and common mode circuits Wire leads Max line voltage-145VAC
Transient Voltage Suppressor - TS260S-00
Transient voltage suppressors designed to protect single phase normal and common mode circuits. Screw terminals. Max line voltage-300VAC
Transient Voltage Suppressor - TS260W-00
Transient voltage suppressors designed to protect single phase normal and common mode circuits. Wire Leads. Max line voltage-300VAC
|
 |
| |
|
